Reinstall the bezel by following the instructions in “Replacing the front bezel” on page 32.
Connect the new card reader’s data cable to the system board.
Use the screws you removed previously to secure the card reader to the bay.
6
7
8
9 Reinstall the computer case’s side panel by following the instructions in “Replacing the side panel” on page 33.
Adding or replacing a hard drive
To add or replace a hard drive:
Tools
You need a Phillips screwdriver to add or replace a hard drive.
1 Remove the side panel by following the instructions in “Removing the side panel” on page 31.
2 If you are adding a new drive, go to Step 4. If you are replacing an existing drive, go to the next step.
CHAPTER 4: Upgrading Your Computer
5 Slide the new card reader into the bay from the front of the case.
Screws

40