Instructions d’installation

8FIXATION DU RÉFRIGÉRATEUR AUX ARMOIRES

Dans la mesure du possible, exécutez cette étape pour augmenter la sécurité contre les basculements.

Le réfrigérateur doit être maintenu en place pour éviter le basculement.

Levez le panneau de la grille pour obtenir accès à la moulure de la cuve.

Enfoncez une vis dans la moulure et dans l’armoire adjacente, en utilisant les trous fournis.

Suivez la procédure de l’autre côté.

Levez le panneau

de la grille à la position de butée

Vissez les vis dans

la moulure de la cuve et dans les armoires adjacentes

9RÉGLAGE DE L’OUVERTURE DES PORTES

NOTE : Ce réfrigérateur a deux butées de position d’ouverture. Quand l’espace ne permet pas l’ouverture de la porte à 130°, il est possible de réduire l’ouverture à 90°.

IGNOREZ CETTE ÉTAPE SI L’OUVERTURE DE LA PORTE EST SATISFAISANTE POUR L’INSTALLATION.

Ouvrez la porte pour exposer la charnière inférieure. Notez l’emplacement de l’axe de butée de la porte. L’axe est installé à la position de 130° à l’usine.

Fermez partiellement la porte. Du dessus, avec un tournevis, dévissez l’axe de la butée de porte et l’installez à la position de 90°.

Intérieur

90°

Porte

 

 

130°

 

 

Charnière

 

10INSTALLATION DU PANNEAU DE LA GRILLE

Levez le panneau de la grille à la position en butée.

Levez le panneau de grille

Enlevez les 4 vis de la moulure inférieure. Gardez toutes les vis.

Déposez la moulure inférieure.

NOTE : Les panneaux en acier inoxydable et en acrylique sont couverts d’une pellicule protectrice. Enlevez la pellicule avant d’installer le panneau.

Glissez le panneau sur le panneau métallique de soutien et sous la moulure.

Si nécessaire, tapez avec un bloc de bois jusqu’à ce que le panneau glisse sous la moulure supérieure.

Réassemblez la moulure inférieure. Serrez les vis.

77

Page 77
Image 77
GE 48, 42 owner manual Installation DU Panneau DE LA Grille, Fixation DU Réfrigérateur AUX Armoires

48, 42 specifications

The GE 42 and GE 48 are two state-of-the-art aircraft engines produced by General Electric, renowned within the aerospace sector for their advanced technologies and high-efficiency performance. These engines, designed primarily for commercial and military aviation, exemplify GE's commitment to innovation in the world of jet propulsion.

One of the distinguishing features of the GE 42 is its high bypass ratio, which allows for reduced fuel consumption and lower emissions during operation. This characteristic directly contributes to the engine's environmental efficiency, making it a favorite among airlines looking to minimize their carbon footprint while maximizing fuel economy. The GE 42 is equipped with advanced composite fan blades and fan cases, which contribute to its robust performance while maintaining a lightweight structure.

On the other hand, the GE 48 boasts similar high bypass ratio features but comes with slightly enhanced performance metrics suitable for larger aircraft. The GE 48 utilizes cutting-edge digital technologies, including predictive maintenance systems, enabling real-time monitoring of engine performance. This capability allows operators to make informed decisions about maintenance schedules and operational efficiency.

Both engines employ the latest in additive manufacturing, allowing for complex parts to be produced with a high degree of precision and reduced waste. This not only enhances performance but also lowers production costs, ensuring that GE remains competitive in the market. Additionally, both the GE 42 and GE 48 feature improved aerodynamics, with specially designed turbine blades that optimize airflow, thereby boosting overall efficiency.

The durability of these engines is another notable highlight. They are designed to withstand extreme operational conditions, ensuring reliability whether used for long-haul flights or military missions. Engine life extends through advanced materials that can endure high temperatures and stresses, making them suitable for various applications.

In conclusion, the GE 42 and GE 48 stand out in the aviation industry for their innovative technologies and characteristics. Their high bypass ratios, use of advanced materials, digital monitoring systems, and aerodynamic designs make them exemplary choices for modern aviation needs, catering to both commercial and military sectors while focusing on sustainability and performance. As aviation technology continues to evolve, these engines remain at the forefront, embodying the future of flight.