About the temperature controls.

 

 

GEAppliances.com

 

ADJUST TEMPERATURE

 

 

COLDER

 

WARMER

 

 

REFRIGERATOR

37º F IS RECOMMENDED

HOLD FOR

 

 

3 SECS

 

 

 

 

TO ACTIVATE

 

COLDER

 

WARMER

LOCK

DISPLAY

FREEZER

 

0º F IS RECOMMENDED

 

 

 

 

TEMP

 

 

 

 

 

 

ICE DISPENSER

LIGHT

 

 

 

DOOR ALARM

WATER CRUSHED

CUBED QUICK ICE

RESET FILTER

HOLD 3 SECS

The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer.

The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

Safety Instructions Operating Instructions Installation Instructions

To change the temperature, press and release the WARMER or COLDER button. SET will illuminate in the display, as well as the set temperature. To change the temperature, tap either the WARMER or COLDER button (while SET is illuminated) until the desired temperature is displayed. Refrigerator temperatures can be adjusted between 34°F and 47°F and the freezer temperatures can be adjusted between –6°F and +8°F.

Once the desired temperature has been set,

the temperature display will clear after 10 seconds.

To display the temperature, the DISPLAY TEMP button may be tapped.

Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.

Troubleshooting Tips

Performance Air Flow System

The Performance Air-Flow System is designed to

wall of the refrigerator and the freezer. Placing food

maximize temperature control in the refrigerator

in front of the louvers on these components will not

and freezer compartments. This unique special

affect performance.

feature consists of the Air Tower along the back

 

5

Consumer Support

Page 5
Image 5
GE 48, 42 owner manual Performance Air Flow System

48, 42 specifications

The GE 42 and GE 48 are two state-of-the-art aircraft engines produced by General Electric, renowned within the aerospace sector for their advanced technologies and high-efficiency performance. These engines, designed primarily for commercial and military aviation, exemplify GE's commitment to innovation in the world of jet propulsion.

One of the distinguishing features of the GE 42 is its high bypass ratio, which allows for reduced fuel consumption and lower emissions during operation. This characteristic directly contributes to the engine's environmental efficiency, making it a favorite among airlines looking to minimize their carbon footprint while maximizing fuel economy. The GE 42 is equipped with advanced composite fan blades and fan cases, which contribute to its robust performance while maintaining a lightweight structure.

On the other hand, the GE 48 boasts similar high bypass ratio features but comes with slightly enhanced performance metrics suitable for larger aircraft. The GE 48 utilizes cutting-edge digital technologies, including predictive maintenance systems, enabling real-time monitoring of engine performance. This capability allows operators to make informed decisions about maintenance schedules and operational efficiency.

Both engines employ the latest in additive manufacturing, allowing for complex parts to be produced with a high degree of precision and reduced waste. This not only enhances performance but also lowers production costs, ensuring that GE remains competitive in the market. Additionally, both the GE 42 and GE 48 feature improved aerodynamics, with specially designed turbine blades that optimize airflow, thereby boosting overall efficiency.

The durability of these engines is another notable highlight. They are designed to withstand extreme operational conditions, ensuring reliability whether used for long-haul flights or military missions. Engine life extends through advanced materials that can endure high temperatures and stresses, making them suitable for various applications.

In conclusion, the GE 42 and GE 48 stand out in the aviation industry for their innovative technologies and characteristics. Their high bypass ratios, use of advanced materials, digital monitoring systems, and aerodynamic designs make them exemplary choices for modern aviation needs, catering to both commercial and military sectors while focusing on sustainability and performance. As aviation technology continues to evolve, these engines remain at the forefront, embodying the future of flight.