Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Troubleshooting tips…

Problem

 

Possible Causes

What To Do

 

 

 

 

Frequent “buzzing” sound

 

Icemaker power switch is in the

Set the power switch to the O (off) position. Keeping it

 

 

I (on) position, but the water supply

in the I (on) position will damage the water valve.

 

 

to the refrigerator has not been

 

 

 

connected.

 

Ice cubes have odor/taste

 

Ice storage bin needs cleaning.

Empty and wash bin. Discard old cubes.

 

 

 

 

 

 

Food transmitting odor/taste

Wrap foods well.

 

 

to ice cubes.

 

 

 

 

 

 

 

Interior of refrigerator

See Care and cleaning.

 

 

needs cleaning.

 

Small or hollow cubes

 

Water filter clogged.

Replace filter cartridge with new cartridge or with plug.

 

 

 

 

Slow ice cube freezing

 

Door left open.

Check to see if package is holding door open.

 

 

 

 

 

 

Temperature control not set

See About the temperature controls.

 

 

cold enough.

 

Cube dispenser does not work

 

Icemaker turned off or

Turn on icemaker or water supply.

 

 

water supply turned off.

 

 

 

 

 

 

 

An item is blocking or has fallen into

Remove any item that might be blocking, or has fallen into,

 

 

the ice chute inside the top door

the chute.

 

 

bin of the freezer.

 

 

 

 

 

 

 

Ice cubes are frozen to

Remove cubes.

 

 

icemaker feeler arm.

 

 

 

 

 

 

 

Irregular ice clumps in

Break up with fingertip pressure and discard remaining clumps.

 

 

storage container.

Freezer may be too warm. Adjust the freezer control to a

 

 

 

 

 

 

colder setting, one position at a time, until clumps do not form.

 

 

 

 

 

 

Dispenser is LOCKED.

Press and hold the LOCK button for 3 seconds.

 

 

 

 

Water has poor taste/odor

 

Water dispenser has not been

Dispense water until all water in system is replenished.

 

 

used for a long time.

 

 

 

 

 

Water in first glass is warm

 

Normal when refrigerator

Wait 24 hours for the refrigerator to completely cool down.

 

 

is first installed.

 

 

 

 

 

 

 

Water dispenser has not been

Dispense water until all water in system is replenished.

 

 

used for a long time.

 

 

 

 

 

 

 

Water system has been drained.

Allow several hours for replenished supply to chill.

 

 

 

 

Water dispenser does

 

Water supply line turned

See Install water line.

not work

 

off or not connected.

 

 

 

 

 

 

 

Water filter clogged.

Replace filter cartridge or remove filter and install plug.

 

 

 

 

 

 

Air may be trapped in the water system.

Press the dispenser arm for at least two minutes.

 

 

 

 

 

 

Dispenser is LOCKED.

Press and hold the LOCK button for 3 seconds.

 

 

 

 

 

 

Refrigerator control setting is too cold.

Set to a warmer setting.

 

 

 

 

Water spurting from

 

Newly-installed filter cartridge.

Run water from the dispenser for 3 minutes (about

dispenser

 

 

one and a half gallons).

 

 

 

 

Water is not dispensed

 

Water in reservoir is frozen.

Call for service.

but icemaker is working

 

 

 

 

Refrigerator control setting is too cold.

Set to a warmer setting.

 

 

 

 

 

 

No water or ice cube production

 

Supply line or shutoff valve is clogged.

Call a plumber.

 

 

 

 

 

 

Water filter clogged.

Replace filter cartridge or remove filter and install plug.

 

 

 

 

 

 

Dispenser is LOCKED.

Press and hold the LOCK button for 3 seconds.

 

 

 

 

CUBED was selected but

 

Last setting was CRUSHED.

A few cubes were left in the crusher from the previous

CRUSHED was dispensed

 

 

setting. This is normal.

 

 

 

 

38

Page 38
Image 38
GE 42, 48 See Care and cleaning, Small or hollow cubes, Slow ice cube freezing, Water dispenser does, Not work, Dispenser

48, 42 specifications

The GE 42 and GE 48 are two state-of-the-art aircraft engines produced by General Electric, renowned within the aerospace sector for their advanced technologies and high-efficiency performance. These engines, designed primarily for commercial and military aviation, exemplify GE's commitment to innovation in the world of jet propulsion.

One of the distinguishing features of the GE 42 is its high bypass ratio, which allows for reduced fuel consumption and lower emissions during operation. This characteristic directly contributes to the engine's environmental efficiency, making it a favorite among airlines looking to minimize their carbon footprint while maximizing fuel economy. The GE 42 is equipped with advanced composite fan blades and fan cases, which contribute to its robust performance while maintaining a lightweight structure.

On the other hand, the GE 48 boasts similar high bypass ratio features but comes with slightly enhanced performance metrics suitable for larger aircraft. The GE 48 utilizes cutting-edge digital technologies, including predictive maintenance systems, enabling real-time monitoring of engine performance. This capability allows operators to make informed decisions about maintenance schedules and operational efficiency.

Both engines employ the latest in additive manufacturing, allowing for complex parts to be produced with a high degree of precision and reduced waste. This not only enhances performance but also lowers production costs, ensuring that GE remains competitive in the market. Additionally, both the GE 42 and GE 48 feature improved aerodynamics, with specially designed turbine blades that optimize airflow, thereby boosting overall efficiency.

The durability of these engines is another notable highlight. They are designed to withstand extreme operational conditions, ensuring reliability whether used for long-haul flights or military missions. Engine life extends through advanced materials that can endure high temperatures and stresses, making them suitable for various applications.

In conclusion, the GE 42 and GE 48 stand out in the aviation industry for their innovative technologies and characteristics. Their high bypass ratios, use of advanced materials, digital monitoring systems, and aerodynamic designs make them exemplary choices for modern aviation needs, catering to both commercial and military sectors while focusing on sustainability and performance. As aviation technology continues to evolve, these engines remain at the forefront, embodying the future of flight.