GE GEK 106168E manual Optional Exp. Board Latched#1, Optional Exp.Boar Latched#2 Closed, Group

2. OPERATION LOGIC

Group	Status	Comment
5.9
5.10
5.11
5.12
5.13
5.14
5.15
6.0
6.1	Parallel EEPROM Alarm	Failure in parallel EEPROM
6.2	Serial EEPROM Alarm	Failure in serial EEPROM
6.3	Out-of-Service	Relay out of service
6.4	Default General Settings	Relay with factory default settings
6.5	Default Table 1 Settings	Table 1 with factory default settings
6.6	Default Table 2 Settings	Table 2 with factory default settings
6.7	Default Table 3 Settings	Table 3 with factory default settings
6.8
6.9
6.10
6.11	52 A Maintenance Alarm	Accumulated I2t above limit for Phase A
6.12	52 B Maintenance Alarm	Accumulated I2t above limit for Phase B
6.13	52 C Maintenance Alarm	Accumulated I2t above limit for Phase C
6.14
6.15
7.0
7.1	Active Table 1	Setting Table #1 is the active Table
7.2	Active Table 2	Setting Table #2 is the active Table
7.3	Active Table 3	Setting Table #3 is the active Table
7.4
7.5
7.6	New Events	There are new events stored in the DBF
7.7	Two Stages Set	BF Logic set to 2 timed stages
7.8	Breaker Pole A Status	CB Pole A Closed
7.9	Breaker Pole B Status	CB Pole B Closed
7.10	Breaker Pole C Status	CB Pole C Closed
7.11	Latching Relay 1 Status	Optional Exp. Board: Latched#1
		Closed
7.12	Latching Relay 2 Status	Optional Exp.Boar: Latched#2 Closed
7.13
7.14
7.15
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8

GEK-106168E DBF Breaker Failure Protection 7