GE JGB810, JGB295 Using the oven controls, Oven Control, Clock, Timer and Features on some models

Using the oven controls.

(Throughout this manual, features and appearance may vary from your model.) GEAppliances.com

Features, appearance and pad locations may vary.

Oven Control, Clock, Timer and Features (on some models)

Bake Pad	Oven Light On/Off Pad
Touch to select the bake function.	Touch to turn the oven light on or off.

Safety Instructions Operating Instructions

Broil Hi/Lo Pad

Touch to select the broil function.

Convection Bake Multi/1 Rack Pad (on some models)

Touch to select baking with the convection function.

Convection Roast Pad (on some models)

Touch to select roasting with the convection function.

Proof Pad (on some models)

Touch to select a warm environment useful for rising yeast-leavened products.

Start Pad

Must be touched to start any cooking or cleaning function.

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode, the times set for the timer or automatic oven operations, and if the range is locked.

If “F–” and a number or letter flash in the display and the oven control signals, this indicates a function error code. Touch the Clear/Off pad. allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.

If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage.

Self Clean Pad

Touch to select self-cleaning function.

See the Using the self-cleaning oven section.

Delay Start Pad

Use along with Cooking Time or Self Clean pads to set the oven to start and stop automatically at a time you set.

Cooking Time Pad

Touch and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

Clear/Off Pad

Touch to cancel ALL oven operations except the clock, timer and Control Lockout.

Clock Pad

Touch before setting the clock.

Number Pads

Use to set any function requiring numbers, such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning.

Kitchen Timer On/Off Pad

Touch to select the timer feature.

Control Lockout (on some models)

The control lockout is 9 and 0. Touch and hold the 9 and 0 pads at the same time for 3 seconds. NOTE: Some models have a Control Lockout pad.

Warming Drawer On/Off Pad (on some models)

Touch this pad and then touch number pads 1–3 to use the warming drawer. See the Using the electric warming drawer section.

11

Installation Instructions

Troubleshooting Tips Consumer Support