Installation Instructions

waRNING! INSTallaTIoN SaFeTy INSTRUCTIoNS

Read these instructions completely and carefully.

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, manufacturer (dealer) or the gas supplier.

Never reuse old flexible connectors. The use

of old flexible connectors can cause gas leaks and personal injury. Always use New flexible connectors when installing a gas appliance.

ImPoRTaNT – Remove all packing material and literature from oven before connecting gas and electrical supply to range.

CaUTIoN – Do not attempt to operate the oven of this range during a power failure (Electric Ignition models only).

n Have your range installed by a qualified installer.

n Your range must be electrically grounded in accordance with local codes or, in the absence of local codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code Part 1 and/or local codes. See electrical Connections in this section.

n Before installing your range on linoleum or any other synthetic floor covering, make sure the floor covering can withstand 180°F without shrinking, warping or discoloring. Do not install the range over carpeting unless a sheet of 1/4″ thick plywood or similar insulator is placed between the range and carpeting.

n Make sure the wall coverings around the range can withstand heat generated by the range up to 200°F.

n Avoid placing cabinets above the range. To reduce the hazard caused by reaching over the open flames of operating burners, install a ventilation hood over the range that projects forward at least 5″ beyond the front of the cabinets.

n The ventilating hood must be constructed of sheet metal not less than 0.0122″ thick.

Install above the cooktop with a clearance of not less than 1/4″ between the hood and the underside of the combustible material or metal cabinet. The hood must be at least as wide as the appliance and centered over the appliance. Clearance between the cooking surface and the ventilation hood surface mUST NeVeR Be leSS THaN 24 INCHeS.

eXCePTIoN: Installation of a listed microwave oven or cooking appliance over the cooktop shall conform to the installation instructions packed with that appliance.

n If cabinets are placed above the range,

allow a minimum clearance of 30″ between the cooking surface and the bottom of unprotected cabinets.

n If a 30″ clearance between cooking surface and overhead combustible material or metal cabinets cannot be maintained, protect the underside of the cabinets above the cooktop with not less than 1/4″ insulating millboard covered with sheet metal not less than 0.0122″ thick. Clearance between the cooking surface and protected cabinets mUST NeVeR Be leSS

THaN 24 INCHeS.

n The vertical distance from the plane of the cooking surface to the bottom of adjacent overhead cabinets extending closer than 1″ to the plane of the range sides must not be less than 18″. (See the Dimensions and Clearances illustration in this section.)

nCaUTIoN – Items of interest to children should not be stored in cabinets above a range or on the backsplash of a range—children climbing on the range to reach items could be seriously injured.

41

Page 40 Page 42
Page 41
Image 41
GE JGB810, JGB295SERSS, JGB805, JGB800, JGB820 manual Installation Instructions, THaN 24 INCHeS
Page 40 Page 42

JGB810, JGB820, JGB800, JGB805, JGB295SERSS specifications

The GE JGB295, JGB295SERSS, JGB805, JGB800, and JGB820 are notable models from General Electric’s line of home appliances, specifically designed to enhance the cooking experience in modern kitchens. Each model boasts distinct features and technologies that cater to varying culinary needs while maintaining efficiency and convenience.

The GE JGB295 is a versatile range that combines both gas cooking and electric baking functions. With its spacious oven capacity, it provides room for multitasking and preparing multiple dishes simultaneously. One of its main features is the powerful convection cooking system, which circulates heat for even cooking results, allowing food to bake uniformly.

The JGB295SERSS variant, an upgraded version of the JGB295, includes the same underlying features but is enhanced with a sleek stainless steel finish, giving it a more modern and professional look. This model also comes equipped with advanced safety features, including a gas shutoff valve and a child lock option to ensure peace of mind during cooking.

The GE JGB805 is another standout model focused on efficiency and performance. With its dual fuel configuration, it combines the advantages of gas burners and electric ovens. The JGB805 features edge-to-edge cooking surfaces, maximizing space and providing an easy-to-clean design. Its Wi-Fi connectivity enables remote control via smartphone, allowing users to monitor cooking progress without being tied to the kitchen.

Meanwhile, the JGB800 model emphasizes user-friendly design through its intuitive controls and smart settings. It features a programmable timer and various cooking modes tailored for different culinary styles. Additionally, its self-cleaning oven function minimizes maintenance efforts, making it a practical choice.

Lastly, the GE JGB820 integrates advanced technology with a focus on enhancing cooking precision. This model features a seamless cooktop for easy cleanup and a heavy-duty oven rack that glides smoothly, accommodating a variety of dish sizes. Its Air Fry mode allows for healthier cooking options, providing crispy results without compromising on flavor.

Together, these GE models represent a commitment to quality, innovation, and convenience, making them valuable additions to any kitchen. Whether it’s baking, roasting, or frying, these ranges are designed to meet diverse cooking needs while ensuring efficiency and ease of use.
Top Page Image Contents