GE JGB295SERSS, JGB805 manual Installation Instructions, Gas/Control Lockout on some models, Safety

Models: JGB810 JGB820 JGB800 JGB805 JGB295SERSS JGB295

1 60
Download 60 pages 15.13 Kb
Page 25
Image 25
Gas/Control Lockout (on some models)

GEAppliances.com

Gas/Control Lockout (on some models)

Safety

GAS/CONTROL

LOCKOUT

Your control will allow you to lock out the surface burners, oven burners and control panel so they cannot be activated.

To lock/unlock the controls:

Turn all surface burners off.

Touch and hold the Gas/Control Lockout pad for 3 seconds until the display shows LOC ON.

To unlock the control, touch and hold the Gas/Control Lockout pad for 3 seconds until the display shows LOC OFF.

When this feature is on and the touch pads are touched, the control will beep and the display will show LOC ON.

nThe control lockout mode affects all controls. No controls will work when this feature is activated.

nThe adjustment will be retained in memory after a power failure.

Instructions Operating

Control Lockout (on some models)

Your control will allow you to lock out the touch pads so they cannot be activated when touched or cleaning the glass panel.

To lock the controls:

Touch the 9 and 0 touch pads at the same time for 3 seconds until the control beeps twice. The display will show LOC continuously and the time of day if not blacked out.

NOTE: all cooking and timing functions will be cancelled when locking out the control.

To unlock the control, touch the

9and 0 touch pads at the same time for 3 seconds until the control beeps twice, and LOC will be removed from the display.

NOTE: Some models have a Control Lockout pad. Touch and hold it for 3 seconds to lock/unlock.

Instructions

Installation Instructions

12-Hour, 24-Hour or Clock Blackout

Your control is set to use a 12-hour clock.

If you would prefer to have a 24-hour military time clock or black out the clock display, follow the steps below.

Touch the Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF.

Touch the Clock pad once. The display will show 12 hr. If this is the choice you want, touch the Start pad.

Touch the Clock pad again to change to the 24-hour military time clock. The display will show 24 hr. If this is the choice you want, touch the Start pad.

Touch the Clock pad again to black out the clock display. The display will show OFF. If this is the choice you want, touch the Start pad.

NOTE: If the clock is in the blackout mode, you will not be able to use the Delay Start function.

Troubleshooting Tips Consumer Support

25

Page 25
Image 25
GE JGB295SERSS Installation Instructions, Gas/Control Lockout on some models, Hour, 24-Hour or Clock Blackout, Safety