Installation Instructions
8aDJUST THe BaKe aND BRoIl BURNeR aIR SHUTTeRS
IF NeCeSSaRy
what adjustment to make:
A. If the flames are yellow, open the air shutter more than the original setting.
B. If the flames blow away or flutter from the burner, close the air shutter more than the original setting.
making the adjustment
A. Locate the Air Shutter
The air shutter for the bake burner is near the back wall behind the storage drawer, warming drawer or kick panel. Remove the drawer or panel. See the Care and cleaning of the range section.
Loosen
Air adjustment shutter
The air shutter for the broil burner is accessible in the top rear of the oven.
Air
adjustment shutter
Loosen
B.Using a screwdriver, loosen the air shutter adjustment screw.
C.Make the air shutter adjustment.
D.Retighten the air shutter screw.
E.Check that the inner cone of the flame is between ½” and ¾” (12.7 mm and 19.1 mm) long.
after confirming correct burner operation, replace all parts
9leVelING THe RaNGe
a. Install the oven racks in the oven and position the range where it will be installed.
| Raise | Lower | |
Lower | range | ||
range | |||
range |
|
|
Leg leveler
Raise range
(on some models) | (on some models) |
B. Check for levelness by placing a spirit level or a cup, partially filled with water, on one of the oven racks.
If using a spirit level, take two
C. Remove the drawer. See the Care and cleaning of the range section. The front leveling legs can be adjusted from the bottom and the rear legs can be adjusted from the top or the bottom.
D. Use an
e. After the range is level, slide the range away from the wall so that the
50