GE JGB805 Consumer Support Troubleshooting, Oven Racks and Drawer Racks, Oven Light Replacement

Models: JGB810 JGB820 JGB800 JGB805 JGB295SERSS JGB295

1 60
Download 60 pages 15.13 Kb
Page 38
Image 38
Oven Racks and Drawer Racks

Instructions

Care and cleaning of the range.

Oven Racks and Drawer Racks

Instructions Safety

If your oven is equipped with nickel oven racks, they should be removed from the oven before beginning the self-clean cycle.

To clean the nickel racks, use an abrasive cleanser. After cleaning, rinse the racks with clean water and dry with a clean cloth. If the racks ever become hard to slide, wipe the rack edges or oven rack supports with vegetable oil.

If your oven is equipped with gray porcelain-coated racks, they may be cleaned in the oven during the self-clean cycle.

They may also be cleaned by using

an abrasive cleanser. After cleaning, rinse the racks with clean water and dry with

a clean cloth. If the racks ever become hard to slide, wipe the rack edges or oven shelf supports with vegetable oil.

Operating

Installation Instructions

Tips

Wire cover holder.

Oven Light Replacement

Oven Light ReplacementCAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely.

The oven light bulb is covered with a removable glass cover that is held in place with a bail-shaped wire. Remove the oven door, if desired, to reach cover easily.

To remove:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Do not touch hot bulb with a wet cloth. Replace bulb with a 40-watt household appliance bulb.

To replace cover:

Place it into the groove of the light receptacle. Pull the wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire is in the depression in the center of the cover.

Connect electrical power to the range.

Removable Storage Drawer (on some models)

Consumer Support Troubleshooting

The storage drawer may be removed for cleaning under the range.

The storage drawer is a good place to store cookware and bakeware. Do not store plastics and flammable material in the drawer.

The storage drawer may be removed for cleaning under the range. Clean the storage drawer with a damp cloth or sponge. Never use harsh abrasives or scouring pads.

To remove storage drawer:

Pull drawer straight out until it stops.

Tilt the front of the drawer up and free of the range.

To replace storage drawer:

Set the stops on the back of the drawer over the stops in the range.

Slide drawer evenly and straight back, so that the rails in the range are engaged.

38

Page 38
Image 38
GE JGB805 Consumer Support Troubleshooting, Oven Racks and Drawer Racks, Oven Light Replacement, Instructions, Operating