GE Monogram ZET2S, ZET1P, ZET2P, ZET1S owner manual Before You Begin, Full extension oven racks

Before You Begin

Wall Oven

Full extension oven racks

Upper front rail

Lower front rail

To avoid possible burns, place the racks in the correct position before turning on the oven.

The correct rack position depends on the kind of food and the browning desired.

The racks have a frame that locks into the rack supports on both sides. Once the frame is locked into place, always pull the rack out, by its upper front rail, to its full extension stop position, when placing or removing cookware.

The oven has 5 rack positions

3.Firmly holding onto both the upper and lower front rack rails, pull the rack forward and remove it from the oven.

	Lower
Upper	front rail
front rail

Rack frame

Rack extended

to its full stop

position

Upper front rack rail

To replace a rack:

1.Place the rear rack locks over and onto the rack supports (five rack positions are available including the top position).

To remove a rack:

1.Make sure the rack is pushed all the way into the oven.

2.Grasp the rack by both its upper front rail and its lower front rail and lift straight up to unlock the front rack locks from the rack supports.

Lift to unlock front rack locks from the rack support

	Lower
Upper	front rail
front rail

Front rack lock

2.Slide the rack all the way in until the

rear rack locks are secure on the rear rack supports and press the front rack locks onto the front rack supports.

Front rack lock

Slide the rack all the way in and push down to lock the front rack locks onto the front rack supports

11