Oven lights, To remove, To replace | GE Monogram ZET1P, ZET2P, ZET1S

Care and Cleaning

Wall Oven

Oven lights

Each oven is equipped with two halogen light assemblies located on the side walls of the oven. The lights come on when the door is opened or when the oven is in a cooking cycle. The oven lights do not come on during self-cleaning or if the Sabbath Feature is set.

Each light assembly consists of a removable light cover with two locking clips, a light compartment with three light bulb sockets and three halogen light bulbs.

CAUTION: Before replacing the bulb, disconnect electrical power to the oven at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

For your safety, do not touch a hot bulb with bare hands or a damp cloth.

To remove:

Remove the racks from the oven. See the Full extension oven racks section.

Using an adjustable wrench, remove the four nuts holding the rack support over the light assembly.

Remove the glass light cover by pulling its back edge out and rolling it toward you.

Do not remove any screws.

NOTE: The two locking clips may fall from the glass light cover. Upon replacement, they will need to be placed in the correct position on the light cover and pressed back into the light compartment until seated.

Using gloves or a dry cloth, remove the burned-out light bulb by pulling it straight out.

To replace:

Use a new 120-volt Halogen bulb, with G8 pins, not to exceed 25 watts.

Replacement bulbs may be purchased by calling 800.626.2002. Order Part Number WB25T10064.

NOTE: Higher wattage bulbs will damage your oven.

Using gloves or a dry cloth, remove the bulb from its packaging. Do not touch the bulb with bare fingers. Oil from bare fingers may cause hot spots on the glass surface and lead to premature failure of the bulb. If you do touch the glass, clean it with alcohol prior to installation.

Push the bulb straight into the receptacle all the way.

Replace the light cover, by placing its

front edge under the front two tabs in the light compartment. Roll the back edge into place, making sure that it is firmly seated.

NOTE: If		Hold	Place front
the locking	locking		edge of
the locking	locking		lens cover
clips fell	clips in		lens cover
clips fell	place on		under
from the	place on		under
from the	lens cover		front two
glass lens cover,	back edge		tabs
hold them on the
cover, in the correct
position, while
replacing the cover on		Press the light cover
the light compartment.		into place

The light cover must be in place when using the oven.

For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is off, disconnected from the power supply, and completely cool.

Replace the rack support with the slotted holes over the rear bolts and the round holes over the front bolts. Lightly secure with the four nuts removed earlier, but do not over-tighten or the enamel could be chipped.

Slotted	Round
holes	holes
over	over
rear	front
bolts	bolts

Replace the racks. See the Full extension oven racks section.

Reconnect electrical power to the oven.

ZET1S, ZET1P, ZET2S, ZET2P specifications

The GE Monogram series of luxury appliances continues to set the standard in kitchen innovation, and the refrigeration units ZET2P, ZET2S, ZET1P, and ZET1S are prime examples of this commitment to excellence. Each model in this series is designed to combine style with advanced technology, ensuring that both functionality and aesthetics are met.

The ZET2P and ZET2S are categorized as 36-inch built-in refrigerators that cater to the needs of upscale homeowners. The ZET2P features a sophisticated platinum finish while the ZET2S offers a timeless stainless steel look, both embodying the brand’s focus on luxury. One of the standout features of these models is the advanced temperature management system. This system ensures that food stays fresher for longer by maintaining optimal temperatures throughout the refrigerator. The units are equipped with multiple sensors that continuously monitor and adjust the temperature for different areas such as the chill drawers and door compartments.

On the other hand, the ZET1P and ZET1S are slightly smaller at 30 inches wide, making them ideal for compact kitchens without sacrificing storage space. Like their larger counterparts, they also feature high-end temperature-controlled zones which allow users to set the temperature according to the type of food being stored. Additionally, both models come with adjustable shelving, enabling homeowners to customize the interior layout for maximum flexibility.

All four models boast innovative features such as the new water filtration system, which ensures that ice and water are clean and taste great. Moreover, the LED lighting inside the refrigerator provides bright and efficient illumination, making it easy to find ingredients even in the darkest corners.

A notable characteristic of the GE Monogram refrigerators is their seamless integration into cabinets, offering a sleek and cohesive look to kitchen aesthetics. Installation is made simple thanks to the user-friendly design.

Furthermore, these appliances are equipped with Wi-Fi connectivity, allowing for remote monitoring and control. Homeowners can adjust settings and receive alerts via their smartphone, ensuring that their food is always stored safely.

In summary, the GE Monogram ZET2P, ZET2S, ZET1P, and ZET1S refrigerators stand out for their luxury design, advanced technologies, and customizable features. They redefine what it means to combine style and functionality in a modern kitchen.

GE Monogram ZET1P, ZET2P, ZET1S, ZET2S owner manual Oven lights, To remove, To replace

Models: ZET1S ZET1P ZET2S ZET2P