Go-Video DDV9355 manual Sequential/Loop Recording, Set Record Mode

Sequential/Loop Recording

You can insert two tapes in	1 Open “Setup Menu”
your Dual-Deck VCR and have
them record sequentially or in	Press and hold the Menu button for 3 seconds.
a continuous loop. This will
allow you to record up to 18
hours of programming in SLP
mode. Loop recording is useful	2 Select “Copy/Record Settings”
for continuous recording of
security cameras.
	Press 2.

3 Set “Record Mode”

Press 7 to select from the following options:

•Normal — Tapes record normally (default setting).

•Sequential — When the tape in Deck 1 finishes recording, the tape in Deck 2 will begin recording automatically.

•Loop — When the tape in Deck 1 finishes recording, the tape in Deck 2 will begin recording automatically and Deck 1 will rewind. When the tape in Deck 2 finishes recording, the tape in Deck 1 will record again. This process will repeat continuously until you press Stop on the recording deck.

		R	00
	E		0
	T			09
	N			A
E
•

MENU

/

DECK1DECK2

POWER			PY TAP
			O	E
			C
	SLOW		VCR
1	2		3
TRK	AUTO	TRK	•TV
4	5		6
	SHUTTLE		TV/VCR
7	8		9
POWER			PY TAP
			O	E
			C
	SLOW		VCR
1	2		3
TRK	AUTO	TRK	•TV
4	5		6
	SHUTTLE		TV/VCR
7	8		9

SETUP MENU

1 ➔ Set Clock Menu

2 : Copy/Record Settings

3 : Tuner And Channel List

4 : Dual-Deck Features

5 : Reset Factory Settings

____________________________________

	/	To Move	To Select
		MENU To Quit
		COPY AND RECORD SETTINGS
1 ➔ Copy Mode			Auto
2	: Speed Matching		On
3	:	Copy Audio Insert	Off
4	:	Date/Time Stamp	Timer
5	:	Deck1 Rec Source	Auto
6	:	Deck2 Rec Source	Auto
7	:	Record Mode	Normal

____________________________________

➔/ ➔ = Move ➔ = Sel MENU=Quit

	COPY AND RECORD SETTINGS
1	: Copy Mode	Auto
2	: Speed Matching	On
3	: Copy Audio Insert	Off
4	: Date/Time Stamp	Timer
5	: Deck1 Rec Source	Auto
6	: Deck2 Rec Source	Auto	Normal
7 ➔ Record Mode		Normal	Sequential
____________________________________			Loop
➔/➔ = Move ➔ = Sel		MENU=Quit

52 DUAL-DECK USER’S GUIDE