2 - Initial Settings

Auto Setup

The first time you power on your Dual-Deck VCR, you will be prompted to select English, French, or Spanish for the on- screen menu system. Then the VCR will automatically search for channels and set the VCR’s internal clock.

1 Set Language

Press 1, 2, or 3 to select English, French, or Spanish. To change the language at any other time, see page 6.

POWER

SLOW

1 2 3

TRK AUTO TRK

4 5 6

SHUTTLE

7 8 9

LANGUAGE / LANGUE / IDIOMA

PY T

 

O

AP

 

E

C

 

 

 

 

1English

 

VCR

2 : Français

 

3 : Español

 

 

 

•TV

 

 

 

Select = 1 - 3

TV/VCR

Choisir = 1 - 3

 

 

Elegir = 1 - 3

2 Run Auto Setup

As soon as you set the language, the VCR will automati- cally perform the following steps:

Auto Channel Search — Automatically detects whether you have an antenna or cable, then searches for all active channels. If Auto Setup is unable to locate channels in your area, you can search and add channels manually; see page 30.

Auto Clock Set — Sets the VCR’s internal clock. If Auto Setup is unable to find a clock set channel in your area, you can set the clock manually; see page 7.

This procedure may take a few minutes to complete. When finished, it will tune the VCR to the lowest channel found.

Searching for Channels And Setting Clock

Please Wait . . .

3 Auto Setup is Complete!

Proceed to Chapter 3 for an overview of the Dual-Deck System.

2 - INITIAL SETTINGS 5

Page 14
Image 14
Go-Video DDV9355 manual Initial Settings, Set Language, Run Auto Setup, Auto Setup is Complete