Timer Recording Errors
If there is a problem with your Timer Recording, the word Timer will flash on the Front Panel Display and an error message will appear on the
Tape Missing
Deck | Deck |
Power | Copy Tape |
There is no videotape in the recording deck. |
|
• Insert a videotape in the recording deck. | Stop /Eject Pause Rewind Play F. Forward Record Deck Select |
correct the error, the event will begin if there is still time remaining for that event.
Tape Missing Tab
The videocassette is missing the Record Safety Tab.
•Insert a video cassette with the Record Safety Tab intact, or place a small piece of adhesive tape over the opening to permit recording.
Not Ready
The recording Deck is not in Stop mode (e.g., it is playing, rewinding, etc.).
• Press Stop to stop the recording deck.
Overlapping Events
Record Safety Tab
|
| R | 00 |
|
| E | 0 | ||
| T |
|
| 09 |
| N |
|
| A |
E |
|
|
| |
• |
|
|
|
|
MENU
/
DECK1DECK2
Two or more events are programmed to occur at the same time:
•When you program a new event, the VCR checks all timer events for conflicts. If two events overlap, you will be prompted to either delete one of the events, or allow them to overlap.
•If events overlap, the first event will be completely recorded, then the next event will start and the remainder of that event will be recorded.
| TIMER EVENTS OVERLAP |
| ||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
10 | 11 |
| 12 | 13 | 14 |
| 15 | 16 |
Please review the events
from the Select Event menu and remove one using the CLEAR key
_____________________________________
SET TIMER to Continue MENU to Quit
|
| SELECT EVENT | ||
1 ➔ 10:30 PM | On | Wednesdays | ||
|
| 1H30M | Ch10 | Deck1 Auto |
2 | : | 9:00 AM | On | Sun Dec/06 |
|
| 0H30M | Line1 | Deck2 SP |
3 | : | 7:00 PM | On | |
|
| 2H00M | Line2 | Deck2 SLP |
4 | : 12:15 PM | On | Everyday | |
|
| 0H15M | Ch06 | Deck1 Auto |
➔/➔ = Move | ➔ = Sel | MENU=Quit | ||
