SECTION 5: SET UP
About this Section | Piece Inventory | |
|
|
|
|
|
|
The purpose of this section is to guide you through the required steps to get your machine out of its crate and into operating condition.
This machine presents serious injury hazards to untrained users. Read through this entire man- ual to become familiar with the controls and operations before start- ing the machine!
Wear safety glasses dur- ing the entire set up process!
Unpacking
The Model G0501 is shipped from the manufac- turer in a carefully built crate. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con- dition of your shipment, you should inventory the equipment from the shipping crate.
Main Crate:
•Saw Base Unit
•Blade Guard
•Blade Guard Lower Support Arm
•Blade Guard Upper Support Arm
•Blade Guard Swing Arm
•Push Stick
•Large Extension Table
•Large Extension Table Braces (2)
•Small Extension Table
•Small Extension Table Braces (2)
•Crosscut Table
•Riving Knife
•Rip Fence Rail
•Rip Fence Clamp
•Tool Box
Fence Crate:
•Sliding Table
•Crosscut Fence
•Extruded Aluminum Rip Fence
•Miter Fence
•Long Crosscut Table Brace
•Short Crosscut Table Brace
•Sliding Table End Handle
•Sliding Table End Cap
•Flip Stop w/Indicator on End
•Flip Stop w/Indicator in Middle
•Sliding Table Rail Handle
•Bar w/Scale
•Flat Head Screws (4)
G0501 Sliding Table Saw |