4.Swing the control panel against the frame of the saw and secure it in place with the three caps screws that you removed from the inside of the control panel in step 3.
5.Close the control panel face and secure it with the three cap screws that originally kept it closed, so the control panel is set up simi- lar to the photo in Figure 23.
Figure 23. Control panel correctly set up.
Table Installation
Installing the sliding table is a difficult procedure because the sliding table is very heavy and because the attachment blocks inside the table need to be aligned with the attachment holes on the bottom of the table.
The sliding table for the Model G0501 weighs over 350 lbs. Use at least four strong people to lift it in position. Improper lifting techniques or inadequate lifting assis- tance could result in serious crushing or strain injuries.
