Figure 73. Correct rip fence position when per-
forming crosscutting operations.
6.Position the blade guard to the correct height for your workpiece.
7.Once all the necessary safety precautions have been taken, perform the cutting opera- tion.
Miter Cutting
The miter fence allows miter cuts from 30˚ through 135˚ on boards ranging in length from 91⁄2" through 861⁄2". The table mounted miter scale has a resolution of 1⁄2˚. Either end of the flip stop slide can be slid into the end of the miter fence to accommodate cut off lengths both over and under 45" as shown in Figure 74 & 75.
Figure 74. Example of miter cutting operation
for a cut length less than 45".
Figure 75. Example of miter cutting operation
for a cut length over 45".
G0501 Sliding Table Saw |
