
Figure 34. Pivoting swing arm installed on
supports.
7.Remove the four cap screws under the blade guard and one cap screw at the front.
8.Position the clear blade shield guide holes under the blade guard arm (Figure 35) and secure it with the cap screws removed in step 7. Note—Overtightening cap screws may crack the blade guard.
Figure 35. Clear blade shield installed.
Installing Extension
Tables
To install the extension tables:
1.Assemble the braces to the underside of the small and large extension table, as shown in
Figures 36 & 37. Note—Do not fully tighten the braces to the tables. They will need to be adjusted during installation.
Figure 36. Large extension table and braces.
Figure 37. Small extension table and braces.
G0501 Sliding Table Saw |