Grizzly G0501 To perform a miter cut, Mount the miter fence onto the sliding table

To perform a miter cut:

1.Mount the miter fence onto the sliding table.

2.Position the fence at the desired angle and use the clamp plate ratcheting handle to lock the fence in place. Figure 76 shows the miter fence set to 45˚ on the miter fence scale.

Clamp Plate

Ratcheting Handle

4.Position the flip stop according to the length of the workpiece you want to cut off to the left of the blade.

—If the desired cut-off length to the left of the blade is between 91⁄2" and 45", then the flip stop-end of the slide bar needs to be slid into the main miter fence body first (Figure 78).

Figure 76. Miter fence set to 45˚ mark on the

miter fence scale.

3.Loosen the lock knobs that secure the flip stop slide into position in the miter fence (Figure 77).

Lock Knobs

Miter Fence

Flip Stop

Figure 77. Flip stop slide lock knobs.

Figure 78. Miter fence slide installation for cut

lengths between 91⁄2" and 45".

—If the desired cut-off length to the left of the blade is between 45" and 861⁄2, then the slide bar end opposite the flip stop needs to be slid into the main miter fence body first (Figure 79).

Figure 79. Miter fence slide installation for cut

lengths between 45" and 861⁄2.

G0501 Sliding Table Saw -45-