Grizzly G0501 instruction manual Blades

9

10

11

Figure 5. Blade guard and dust ports.

9.Blade Guard—Fully-adjustable blade guard allows high visibility of the cutting operation while maintaining maximum protection around the saw blade.

10.Upper Dust Collection Port—2" port open- ing allows effective dust extraction from above the cutting operation.

11.Main Dust Collection Port—5" port allows efficient high-volume dust extraction from below the cutting operation.

12

Figure 6. Rip fence scale.

12.Rip Fence Scale—Allows precise measure- ment of rip cutting operations. Features a dual calibration block for effortless scale reading regardless of whether the fence is in the high or low position.

13

14

Figure 7. Blades.

13.Main Blade—Performs the cutting opera- tions.

14.Scoring Blade—Small cutting blade that rotates opposite the main saw blade. The blade scores the workpiece before the actu- al cutting operation is performed; thus, pre- venting tear-out in laminate materials. The scoring blade is adjustable forward and backward, up and down, and in thickness of kerf.

-14- G0501 Sliding Table Saw