Mounting to Shop

Floor

Although not required, we recommend that you mount this machine to the floor. Because this is an optional step and floor materials may vary, floor mounting hardware is not included. Generally, you can either bolt the machine to the floor or mount it on machine mounts. Both options are described below. Whichever option you choose, it is neces- sary to level the machine with a precision level.

Bolting to Concrete Floors

Lag shield anchors with lag bolts and anchor studs (Figure 10) are two popular methods for anchoring an object to a concrete floor. We sug- gest you research the many options and methods for mounting the machine and choose the best that fits your specific application.

Anchor

Stud

Lag Shield

Shield & Bolt

Figure 10. Typical fasteners for mounting to

concrete floors.

NOTICE

Anchor studs are stronger and more per- manent alternatives to lag shield anchors; however, they will stick out of the floor, which may cause a tripping hazard if you decide to move the machine.

Model G0442/G0601 (Mfg Since 8/10)

Using Machine Mounts

Using machine mounts, shown in Figure 11, gives the advantage of fast leveling and vibration reduc- tion. The large size of the foot pads distributes the weight of the machine to reduce strain on the floor.

Figure 11. Machine mount example.

NOTICE

We strongly recommend securing the machine to the floor if it is hardwired to the power source. Consult with your electrician to ensure compliance with local codes.

-23-

Page 25
Image 25
Grizzly G0601 owner manual Mounting to Shop Floor, Bolting to Concrete Floors, Using Machine Mounts