SECTION 5: OPERATIONS
Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.
DO NOT use the dust collector for any other purpose besides collecting dust from connected woodworking machines. A dust collector should NEVER be used as a shop vacuum and IS NOT a substitute for an air filter system. For safest use, wear a respira- tor and use an air cleaner in addition to the dust collector.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Do NOT put hands or small objects near inlet openings during opera- tion. Objects sucked into the inlet will meet with the impeller blade. Failure to heed this warning could result in property damage or per- sonal injury.
General
Operating the Model G0442/G0601 is simple and straightforward. Blast gates located at each of the machines controls the air flow from the woodwork- ing machine to the dust collector. If a machine is not being used, keep the blast gate closed to maintain higher levels of efficiency throughout the system.
Remote Control
The remote control for the Model G0442/G0601 is IR (infrared) rather than RF (radio frequency) to prevent accidental startups by other common RF items such as garage door openers.
Because this remote system is IR, the remote control must be pointing directly at the control box with an unobstructed
If you place the dust collector in a different room or outside of your shop, you must mount the switch in the shop and wire it through the wall to the dust collector to make use of the remote control.
Note: The remote control requires two "AA" batter- ies for operation.
Model G0442/G0601 (Mfg Since 8/10)
