Control Box Panel
Use the illustration of the control box panel in Figure 59 and the descriptions that follow to become familiar with the functions of the buttons on the control box.
REMOTE CONTROL | |||
SWITCH | B | ||
| |||
A |
|
|
|
|
|
| ON/OFF |
2H | 4H | 8H | C |
|
|
| |
H |
|
| D |
OVER | RUN POWER | ||
|
|
| TIMER |
MAIN | F |
| E |
|
|
| |
SWITCH |
|
|
|
| 220 VOLT | ||
G |
|
|
|
Figure 59. Control box panel.
A.Timer Indicator Lights: Turns ON when a timer setting is selected.
B.Infrared Port: Receives infrared communica- tion from the remote control.
C.ON/OFF Button: Starts/stops the dust collec- tor motor.
D.Timer Button: Cycles through the available timer settings.
E.Power Light: Indicates when there is power to the control box.
F.Run Light: Illuminates when the dust collec- tor motor is operating.
G.Main Switch: Enables/disables the power flow to the control box and must be turned ON before using ON/OFF button.
H.Overload Light: Turns ON when the dust collector is overloaded and the motor has stopped.
Note: If the overload light illuminates and the motor stops, you must turn the machine OFF and allow the motor to cool. The overload relay should reset automatically and the light will go out.
If this is a persistent problem, refer to the
Troubleshooting section on Page 49 for additional help.
Model G0442/G0601 (Mfg Since 8/10) |
