Handspring 300 manual Enables you to change the default password, Application-Specific Tasks 111

Change Password.

Security	Enables you to lock your phone and define emergency numbers.
Prefs

Application 6

Tasks

Wireless Mode Lock: Locks your phone and requires you to enter a password to make outgoing calls (other than emergency numbers). Thedefault password is the last fourdigits of your phonenumber. You can still receive incoming calls and view your data in handheld mode.

▶On Power Off. Locks wireless mode each time you turn off your phone.

▶Immediately. Locks wireless mode upon exiting this dialog

box.

Communicator Lock: Locks your phone upon exiting this dialog box. When Communicator Lock is on, you must enter a password to view your data in handheld mode and to make outgoing calls (other than emergency numbers). You can still receive incoming calls. The default password is the last four digits of your phone number.

Important: If you use Communicator Lock to lock your phone, you must enter the exact password to re- activate your phone. If you forget the password, you need to perform a hard reset to resume using your phone. Performing a hard reset deletes all the records in your phone; however, you can restore all previously synchronized data at the next HotSync operation. See page 235 for details. Note that performing a hard reset provides access only to handheld mode. To resume using wireless mode, you must contact Sprint to obtain the unlock code.

Custom Emergency Numbers. Enables you to define three numbers that you can dial manually when your phone is locked.

Enables you to change the default password.

Section 6

Application-Specific Tasks

111