Handspring 300 manual To set your remote cities, Adding cities, To add a city to the list

To set your remote cities:

1.Tap a pick list in the lower part of the CityTime screen and select the city closest to the city you want to display.

Tap to select a remote city

Tip: If a nearby city isn’t in the list, you can use the Edit Cities command to add a new city to the list. See the next section for details.

2.Tap the remaining pick lists and select the other three cities you want to display.

Tip: You can temporarily display the day and time for any other city by tapping the city’s location on the map display.

Adding cities

If the city you want to display is not in the predefined list, you can use the Edit Cities command to add it.

To add a city to the list:

1.Press Menu .

2.Under Options, select Edit Cities (/E).

3.Tap New.

4.Enter the city name and other information.

5.Hold Option and press Return to finish.

CityTime menus

CityTime menus are shown here for your reference, and CityTime features that are not explained elsewhere in this guide are described here. See page 28 for information about choosing menu commands.

164

Section 6

Application-Specific Tasks