Handspring 300 manual Each device must have a unique name

4

7.If any data for your third party applications did not transfer, beam it from your old handheld to your PCS Treo 300.

8.If you created a password on your old handheld, enter it on your PCS Treo 300.

Note: Records you previously marked Private remain marked Private, but you need to reenter a password on your PCS Treo 300.

9.If you had any important settings on your old handheld, such as Network Preferences, manually copy them from your old handheld to your PCS Treo 300.

Each device must have a unique name

After you complete the upgrade process described above, you have two devices with the same name. This is an undesirable situation. Each device must have a unique name in order to prevent unexpected results during HotSync operations and other complications.

We strongly recommend that you perform a hard reset on your old handheld. See page 235 for details.

A hard reset not only erases all data from the old handheld; it also erases the name and makes that handheld a clean slate, ready to receive a new name. The next time you perform a HotSync operation with this old handheld, you are asked to give it a name. Be sure to give it a unique name.

Section 1

Introduction to Your PCS Phone Handspring® Treo™ 300