Handspring 300 manual Setting an infrared to modem configuration, Modem

Auto	Defines a dynamic serial connection between your phone and a modem.
Detect to	Use this connection type with third-party applications that need to
Modem
	reconfigure the serial port when communicating with a modem.
USB/	Defines a direct serial or USB connection between your phone and your
Serial	desktop computer. When you select this option, your phone detects which
to PC
	type of cable you have connected to your computer.
USB/	Defines a direct serial or USB connection between your phone and a
Serial	modem. When you select this option, your phone detects which type of
to Modem
	cable is connected to the modem.
Wireless	Defines a connection between your phone’s built-in wireless modem and
Modem to	a computer.
PC
Wireless	Defines a connection between your phone’s built-in wireless modem and
Modem to	a wireless high-speed packet data network.
Modem
USB	Defines the direct USB connection between your phone and your desktop
to PC	computer. It is used to performa local HotSyncoperation when your phone
	is connected by its USB connector to the cable. The cable is attached to a
	USB port on your desktop computer.
IrCOMM	Defines a connection between the IR port of your phone and the infrared
to PC	device of your computer or laptop.
IrCOMM	Defines a connection between the IR port of your phone and a modem. The
to Modem	modem can be attached to a computer or some other device containing an
	IR port.

Setting an infrared to modem configuration

The following steps demonstrate how to create a modem connection that enables IR HotSync through an IR enabled modem. This modem would then dial a modem attached to your desktop to perform the remote HotSync operation.

Preferences Setting

7

To create an IrCOMM to Modem connection:

1.In the Connection Preferences screen, tap New.

2.Enter a name for this configuration.

3.Tap the Connection Method pick list and select IrCOMM to

Modem.

Section 7

Setting Preferences for Your Phone 193