Handspring 300 manual Using the headset, Place the speaker in your ear, To use the headset

Using the headset

You can connect a headset for hands-free operation. Your PCS Treo 300 is compatible with the included headset and other headsets listed at www.sprintpcs.com. If you need to use your phone while driving and this is permitted in your area, we recommend using a headset.

Note: PCS Treo 300 is not compatible with three-pin (also called three- pole) style headsets. You can determine whether a headset is a three-pin headset by counting the number of silver rings on the headset pin. A three- pin headset has two rings.

To use the headset:

1.Connect the headset plug to the headset jack on the side of your phone.

Speaker

Microphone

Headset button

18

2.Place the speaker in your ear.

3.Press the headset button to perform any of the following functions:

■Answer an incoming call (including an incoming call waiting call).

■Switch between two active calls.

■Place the second call on hold when you have two active calls.

■Hang up an active call.

Section 1

Introduction to Your PCS Phone Handspring® Treo™ 300