Handspring 300 manual Locating top panel controls, Stylus LED Power button IR port Ringer switch

Tip: If your phone screen is turned off, pressing any application button turns on and opens the corresponding application.

9.Keyboard: Enables: you to type letters, numbers and symbols on your phone. See Section 2 to learn how to enter information.

10.Phone screen: Displays the applications and information stored in your phone. It is touch-sensitive and responds to the stylus.

Introduction 1

Locating top panel controls

1.Antenna

2.Stylus

6.LED

3.Power button

4.IR port

5.Ringer switch

1.Antenna: Receives and sends wireless communication signals. The antenna does not telescope out of your phone.

2.Stylus: Serves as the instrument used to tap options on your phone screen. To use the stylus, slide the stylus out of the slot, and hold it as you would a pen or pencil.

3.Power button : Turns your PCS Treo 300 and wireless mode on and off, and controls the keyboard backlight. See page 10 for details.

4.IR port: Uses infrared technology to transmit data to and receive data from other Palm OS devices. See the section that begins on page 78 for details. You can also use the IR port to update the information between your phone and computer using HotSync technology. See the section that begins on page 219 for details.

5.Ringer switch : Controls the ringer setting. See page 211 for details on changing the settings.

Note: Silencing the ringer turns off all system sounds, including alarms. When you silence the ringer, Date Book Plus alarms vibrate.

Section 1

Introduction to Your PCS Phone Handspring® Treo™ 300 7