Handspring 300 manual To beam an application

Tip: For best results, the path between the two devices must be clear of obstacles. If you have difficulty beaming information, see the troubleshooting tips that begin on page 247.

5.Wait for the Beam Status dialog box to indicate that the transfer is complete before you continue working on your phone.

To beam an application:

1.Press Option and then press Menu to access the Applications Launcher.

2.Press Menu .

3.Under App, select Beam (/B).

4.Tap the application you want to transfer.

Note: Some applications are copy-protected and cannot be beamed. These are listed with a lock icon next to them.

5.Tap Beam.

6.When the Beam Status dialog box appears, point the IR port directly at the IR port of the receiving phone.

7.Wait for the Beam Status dialog box to indicate that the transfer is complete before you continue working on your phone.

Common Tasks 5

Section 5

Common Tasks 79