Clean Porcelain Panels
Frequency: As needed
By: Qualified Service Technician
Tools needed: Protective gloves, phillips screwdriver
•Disconnect power to fireplace.
•Remove the “L” plates and inner surround frame (see surround install). This will make the valve compartment and glass accessible. (Refer to Section 3.A. Glass Cleaning.)
•Remove glass rock, set aside.
Note: Mark and note burner tube locations. They are not interchangeable (Figure 3.7).
| Back |
|
| LH |
|
|
| RH |
1 1/4 in. | 2 3/8 in. | 1 7/8 in. |
LH Burner Tube | Back Burner Tube | RH Burner Tube |
Figure 3.7 Burner Tube ID
•Remove three cover plates by removing two screws from each plate. See Figure 3.8.
Remove
Plates
Figure 3.8 Remove Three Plates
•Remove three outside burner tubes by removing two screws on each tube. See Figure 3.9.
Figure 3.9 Remove Outside Burner Tubes
18 | Heat & Glo • LUX60 • |
