• Remove decorative steel log assembly by removing 3 | • Remove pilot shield by removing four screws. See Figure |
screws, lifting up and out (Figure 3.10). | 3.12. |
Figure 3.10 Remove Decorative Steel Log Assembly
•Remove center burner tube by removing two screws. See Figure 3.11.
Figure 3.11 Remove Center Burner Tube
Remove 
4 Screws
Figure 3.12 Remove Pilot Shield
•Remove hearth pan by removing 7 screws. See Figure 3.13.
Figure 3.13 Remove Hearth Pan
•Remove refractory:
-Remove six bottom screws in refractory, then remove the two top screws.
-Pull front refractory flanges inward until they clear the firebox flange.
-Slide refractory forward while lifting back of refractory over pilot. Continue sliding forward evenly until refractory is out.
•Clean porcelain panels with a soft, dry cloth.
•Reinstall refractory, center burner tube, decorative steel log assembly, outside burner tubes, cover plates, glass rocks.
Heat & Glo • LUX60 • | 19 |
