Service Manual | VMH Series | Heat Controller, Inc. |
|
|
|
2. Function
Indoor unit
Operation by remote controller
Sensing room temperature
Room temperature sensor
Pipe temperature sensor
Room temperature control
Maintains the room temperature according to the set temperature
Anti-freeze protection in cooling
Prevents condensate from freezing on evaporator by sensing the evaporator pipe temperature
in cooling mode
Time Delay Safety control
Restart is for approx. 3 minutes
Indoor fan speed control
Turbo, high, med, low, breeze
The unit will decide the louver direction according to operation mode
Sleep mode auto control
The fan is turned to low speed in both cooling and heating
Independent dehumidification
The function is usually used in rainy days in springtime or damp areas
Air flow Direction control
The louver can be set at the desired position or swing up and down automatically
Auto mode
The mode can be change by the room temperature
Temp. Compensation
Indoor golden fin
IonizerIndoor golden fin
SelfIonizerclean
Follow me
Timer function
Prevent the cold wind at the beginning of unit start.
Auto defrost
Auto-restart function
When the power supply is interrupted and then restored, the unit automatically restarts at the previous function setting.
8
