G. Glass Doors

G. Glass Doors

H. Hood WARNING

Handle glass with care.

Inspect the gasket to ensure it is undamaged.

Inspect the glass for cracks, chips or scratches.

Do NOT strike, slam or scratch glass.

Do NOT operate appliance with glass assembly removed, cracked, broken or scratched.

Replace glass assembly as a complete assembly.

If you have decided to install optional doors on your appli- ance, please use them correctly. While operating your appli- ance, you should either have the doors completely open or completely closed, but never partially open.

Note: Glass doors are not optional in the Commonwealth of Massachusetts. They are required.

H. Hood

The hood is shipped on top of the outer shell of the appli- ance. Remove the hood from its shipping location. Locate the four hood retaining clips and slide the hood into them. The hood must be attached or a fi re hazard may result. See Figure 12.10.

Figure 12.10 Installing the Hood

I. Air Shutter Setting

Closed position - natural gas

Open position - propane

I. Air Shutter Setting WARNING

Fire Risk

Combustion Fumes Risk

Appliances equipped with optional glass doors must be operated with doors fully open or fully closed.

Only use glass doors certified for use with this appliance.

If doors are left partially open, gas and

ames may be drawn out of the appliance opening.

Figure 12.11 Air Shutter

Heatilator • GB4336/GB4992 • 4003-085 Rev H • 04/06

27

Page 27
Image 27
Heatiator GB4336 owner manual G. Glass Doors, H. Hood, I. Air Shutter Setting, Fire Risk Combustion Fumes Risk