Heatiator HEIR42H, HEIR42T, HEIR50T, HEIR36H, HEIR36T, HEIR50H owner manual B. Splatter Guard

Figure 13.4 Finishing Template Bends - Inoperable (Fixed) Doors

TAB NOT BENT (TOP AND SIDE FLUSH)

Figure 13.5 Finishing Template Bend - Operable Doors

B. Splatter Guard

The splatter guard is a piece of corrugated material used to protect the appliance during the installation process before finishing work on the whole hearth is complete. Splatter guards may be factory installed or accompany the door of the appliance, depending on the fireplace model. Splatter guards must be removed before appliance is fired.

WARNING! Risk of Fire! Close the ball valve before in- stalling the splatter guard to prevent accidental lighting. Remove the splatter guard before lighting the appliance.

1.Fold top flap along scored lines.

2.Slide side tabs into slots by sides of glass.

Figure 13.6. Splatter Guard Installation

48 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev. D • 8/12