Heatiator HEIR50T, HEIR42H 4 1 5 2 3, 4 1 6 2 3, Burned Portion, Edge Of Log Used For Positioning

Log #5 (2284-705): Locate flat areas on Log #1 and Log #3 that will be used to position Log #5. See Figure 11. Place Log #5 into appliance as shown in Figure 12. Log #5 should contact base refractory and rest on the flat areas as shown in Figure 11. Burned portion of Log #5 should be in front of Log #1. Log should be about 1/2 inch from front outer edge of base refractory when properly positioned. See Figure 12.

BURNED

PORTION

5

6

EDGE OF LOG USED

FOR POSITIONING

Figure 10.

FOR LOG #5

1

FOR

LOG #5

2 FOR LOG #6

3

Figure 11.

Log #6 (2284-706): Locate flat areas on Log #2 and Log #3 that will be used to position Log #6. See Figure 11. Place Log #6 into appliance as shown in Figure 13. Edge of Log #6, highlighted in Figure 10, will be about 1/2 inch from the center grate tine on both HEIR36 and HEIR42. Right side of log contacts right grate tine.

4

1

5

2

3

BURNED

PORTION

1/2 INCH

LOG DOES NOT

2CONTACT GRATE

TINE

1/2 INCH

HEIR42 SHOWN

Figure 12. Log #5 Placement Figure 13. Log #6 Placement

4

1

6 5

2

3

Figure 14. Log Set Installed. 2284-935C

56 Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev. D • 8/12