Replacing Fixed Glass Assembly

This fixed glass assembly is held in place by two side clips, one top retaining rail and lower glass clips. The HEIR36 has three lower glass clips and the HEIR42 and HEIR50 have four lower glass clips. To remove clips, en- gage the spring clips with the tool and pull tool out slightly. Rotate wrist left and right to disengage clip. The glass clip tool is shown in Figure 14.3.

1.Tool is fastened to the lower right corner of the fire- place. Remove tool by removing one screw. If glass clip removal tool becomes misplaced, a cotter pin re- moval tool may be used.

2.Position the fixed glass assembly so that it is about eight inches from the face of the appliance. See Fig- ure 14.6. An arch door application will require the glass to be installed at a steeper angle.

Figure 14.6

3.Center the fixed glass assembly from left to right in- side the top of the appliance opening.

The glass frame has tabs on the bottom that coincide with the bottom glass clip location. The HEIR36 has three tabs and the HEIR42 and HEIR50 have four tabs. If the glass is not centered, it can not be in- stalled properly. Align the notch at the top center of the glass frame assembly with the notch on the top retaining rail. See Figure 14.7.

TOP RETAINING RAIL NOTCH

GLASS FRAME NOTCH

Figure 14.7. Align Notches

4.Install fixed glass assembly by lifting it up and sliding it into the top retaining rail. Grasp the fixed glass as- sembly on the sides.

CAUTION! Risk of Injury! DO NOT put fingers under glass frame. Fingers may get pinched by glass frame during installation.

Once the glass is installed tightly into the top retainer rail, push in the bottom so that the glass assembly rests on the support tabs on the glass clip. See Figure 14.8.

GRASP FRAME BY LIP THAT PROJECTS FROM GLASS. DO NOT INSERT FINGERS UNDER RAIL.

LIP

RAIL

Figure 14.8.

5.Ensure the fixed glass assembly is situated tight against the firebox face. Engage the left and right glass clips using the glass clip tool. See Figure 14.9.

Figure 14.9

6.Once the left and right glass clips are installed, en- gage the bottom clips by inserting the glass clip tool at a sharp downward angle to get between the gap be- tween the glass frame and the front bottom fireplace lip. See Figure 14.10.

7.Return glass tool to its shipping location in the low- er right corner of the appliance and secure with one screw.

Figure 14.10

Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev. D • 8/12

61

Page 60 Page 62
Page 61
Image 61
Heatiator HEIR42T, HEIR42H, HEIR50T, HEIR36H, HEIR36T, HEIR50H owner manual TOP Retaining Rail Notch Glass Frame Notch
Page 60 Page 62

HEIR50H, HEIR36T, HEIR36H, HEIR50T, HEIR42T specifications

The Heatiator range of heating appliances, including the HEIR36T, HEIR50T, HEIR42H, HEIR42T, and HEIR50H, represents a blend of cutting-edge technology and stylish design, tailored to meet various heating needs in residential spaces. Each model exhibits unique features, yet shares a commitment to efficiency and user-friendliness.

Starting with the HEIR36T, this model is compact yet powerful, making it ideal for smaller living areas. It boasts an efficient heating system that utilizes advanced ceramic heating elements, ensuring rapid warmth. The sleek design is complemented by a digital control panel, allowing users to easily adjust settings for optimal comfort.

In contrast, the HEIR50T caters to larger rooms, offering increased power and a higher heat output. Its robust construction is designed for durability, while energy-efficient technology minimizes operational costs. The HEIR50T comes equipped with a programmable thermostat, enabling users to set heating schedules to align with their lifestyle.

The HEIR42H stands out with its hybrid heating capability, combining traditional radiant heat with modern convection elements. This dual functionality allows for faster and more even heat distribution throughout the space. The HEIR42H is particularly popular for its versatility, suitable for use in various environments from homes to commercial spaces.

The HEIR42T model shares many of the benefits of the HEIR42H but focuses on a sleek, slim-line design that doesn’t compromise on performance. Ideal for minimalistic interiors, it offers the same advanced heating technology, ensuring efficient warmth without taking up excess space.

Lastly, the HEIR50H is designed for heavy-duty performance, making it the perfect choice for larger areas that require substantial heating power. It features enhanced insulation and expanded heating elements, ensuring that even the coldest rooms achieve a comfortable temperature quickly.

In summary, the Heatiator HEIR series exemplifies innovation in home heating solutions. With various models to choose from, customers can select the unit that best suits their space requirements while benefiting from technologies designed for efficiency and comfort. The digital controls, programmable settings, and modern designs make these heaters both functional and aesthetically pleasing, reinforcing Heatiator's commitment to quality and user satisfaction.
Top Page Image Contents