Heatiator HEIR36T 1/4 IN. FROM LOG, Log Contacts To Refractory Grate Tines, NOTCH FOR LOG #5

3

Figure 6.

1

1/4 IN. FROM LOG

LOG CONTACTS TO REFRACTORY GRATE TINES

3

NOTCH FOR LOG #5

Figure 7.

Log #3 (2285-703): Place log in appliance as shown in Figure 7. Log #3 should contact right and right center grate tines and also be about 1/4 inch from right side refractory.

Log #4 (2285-704): See Figure 8. Place Log #4 in appliance with burned edge facing center. The bottom of log #4 will rest against left side refractory and on bottom refractory. Slide bottom of Log #4 toward front of appliance until it contacts back side of Log #2. Rest top of Log #4 in notch on top left corner of Log #1. See Figure 2 and Figure 9.

4

BURNED EDGE

Figure 8.

4 1

LOG CONTACTS SIDE

REFRACTORY

2

Figure 9.

Log #5 (2285-705): Locate notched area on Log #1 that will be used to position Log #5. See Figure 2. Place Log #5 into appliance with “burned” edge toward center of appliance. See Figure 11. Log will sit on bottom refractory and should be about 1-1/2 inches from right grate tine. The center of the log should rest in notch on Log #3 and the top of Log #5 should rest in the notch on Log #1.

BURNED EDGE

5

6

NOTCH FOR LOG #6

5

LOG CONTACTS

REFRACTORY

1-1/2 IN.

(APPROXIMATELY)

Figure 10.	Figure 11.
58	Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev. D • 8/12