High End Systems DL.3 - page 183

CHAPTER 13
Effect Mode Options Descriptions
DL.3 Digital Light User Manual 161
Modifier 1: This parameter allows you to select from three framing modes.
Modifier 2: When the Modifier 1 DMX value = 0 or 1, this channel selects from profiles that
vary in gradient density or pattern. When Modifier 1 DMX value = 2, this Modifier is not used.
Modifier 3: When Modifier 1 DMX Value = 1, this parameter determines how to use the
rendered Graphic Object content as a texture for the frame. The image below shows an
examples of
DMX
Value Action
0Frames the image using an Internal Frame profile to control the Global Fade Edge parameter
appearance.
1Frames the image using an Internal Frame profile to control the Global Fade Edge parameter
appearance. Rendered Graphic Object content is selected at Frame texture using Modifier 3
parameter
2Image clipping changing operation of the Global Image Edge Fade parameters to Emulate Framing
Shutters
Modifier 1
DMX Value
Modifier 3
DMX
value Action
0NA Not Used
1
0Graphic Object 1 texture without applied Effects
1Graphic Object 1 texture including its first applied Effect
2Graphic Object 1 texture including its first two applied Effects
3Graphic Object 1 texture including its first three applied Effects
10 Graphic Object 2 texture without applied Effects
11 Graphic Object 2 texture including its first applied Effect
12 Graphic Object 2 texture including its first two applied Effects
13 Graphic Object 2 texture including its first three applied Effects
20 Graphic Object 3 texture without applied Effects
21 Graphic Object 3 texture including its first applied Effect
22 Graphic Object 3 texture including its first two applied Effects
23 Graphic Object 3 texture including its first three applied Effects
2NA Not Used