CHAPTER 15
Live Video Input and Control
184 DL.3 Digital Light User Manual
Live Video Connection Options
The DL.3 fixture has video connectors for RGBHV, VGA and S-Video on its rear panel, as shown
in the following figure.
Configuring the Video Input Source

S-Video

DL.3 fixtures support multiple SVideo formats including:
You will need to configure the DL.3 fixture to identify which video input source you have chosen.
The active input can be configured the following ways:
• Manually using the DL.3 menu system (see information about the Projector Input field on
the “Set_Projector Screen” on page 3-31.)
• Remotely through the CMA (see “DL.3 and DL.2 Media Server Configuration Options” on
page 16-208).
• Via the DMX console commands (see “Projector Control” on page 14-181).
NOTE: The integrated camera provides an NTSC_M video signal.
CAUTION:
To avoid damaging the fixture and voiding the warranty, do not
physically connect to the RGBHV and VGA inputs at the same time.
NTSC_M PAL_B PAL_H SECAM_B SECAM_K
NTSC_MJ PAL_D PAL_I SECAM_D SECAM_K1
PAL_G PAL_M SECAM_G SECAM_L
PAL_N SECAM_H SECAM_L1
USB1
100-120V;
50-60Hz;7A
200-240V;
50-60Hz;3.5A
USB2
S-Video Camera S-Video In to
the graphics engine
VGA input to
RGBHV input option
to the projector
Output to another
DL.3 fixture or device
i
nc
l
u
di
ng
h
ar
d d
r
i
ves runn
i
ng t
h
e
C
MA
the projector
SDI Inpu
t
SDI Output