Hitachi L100 instruction manual 000

3–4

Using Keypad Devices

Keypad Navigational Map

Whether you use the keypad on the inverter, the DOP software for the personal computer, or the hand-held digital operator panel, each navigates the same way. The diagram below shows the basic navigational map of parameters and functions.

Configuring Drive Parameters

Monitor Mode
	PRG LED = OFF
		Select Function
		1
Display		D 09
Data
		1	2
000	FUNC.	D 01
		1	2
		C --
		1	2
		B --
		1	2
		A --
		1	2
		F 04
		1	2
		F 01
		2

Program Mode

PRG LED = ON

Select Parameter Edit Parameter

		Increment/
1		decrement
		value
	91	1	2
1	2	FUNC.
FUNC.	01	Edit
			FUNC.
1	2	1234
	92
FUNC.		FUNC.
	2
1			STR
	01	FUNC.
1	2	Write
FUNC.
	98	data to
		EEPROM
1	2
	01	Return to
2		parameter
		list
FUNC.

NOTE: The inverter 7-segment display shows lower case “b” and “d”, which means the same as the upper case letters “B” and “D” used in this manual (for uniformity “A to F”).

NOTE: The Store Key saves the edited parameter (shown in the display) to the EEPROM in the inverter, regardless of the programming device. Upload and download of parameters is accomplished through a separate command — do not confuse Store with Download or Upload.