“B” Group: Fine Tuning Functions

Configuring
Drive Parameters
3–26
B82 Start frequency
adjustment Sets the starting frequency for
the inverter output, range is 0.5
to 9.9 Hz
✘0.5 Hz F-02 FMIN.
B83 Carrier frequency
setting Sets the PWM carrier (internal
switching frequency), range is
0.5 to 16.0 kHz
✘5 kHz F-36 CARRIER
B84 Initialization mode
(parameters or trip
history)
Select the type of initialization
to occur, two option codes:
00...Trip history clear
01...Parameter initialization
✘00 — F-38 INIT
MODE
B85 Country code for
initialization Select default parameter values
for country on initialization,
four options, option codes:
00...Japan version
01...Europe version
02...US version
03...reserved (do not set)
✘01/02 —F-38 INIT SEL
B86 Frequency scalar
conversion factor Specify a constant to scale the
displayed frequency for D07
monitor, range is 0.1 to 99.9
✘1.0 — Mon. /HZ
B87 STOP key enable Select whether the STOP key
on the keypad is enabled, two
option codes:
00...enabled
01...disabled
✘00 — F-28 STOP-SW
B88 Resume on FRS
cancellation mode Selects how the inverter
resumes operation when the
free-run stop (FRS) is
cancelled, two options:
00...Restart from 0Hz
01...Restart from frequency
detected from real speed of
motor
✘00 — F-10 RUN FRS
B89 Data select for digital
operator OPE-J Select the monitoring data to
send to the hand-held digital
operator, seven option codes:
01...Output frequency (D01)
02...Output current (D02)
03...Motor direction (D03)
04...PID PV feedback (D04)
05...Input states for input
terminals (D05)
06...Output states for output
terminals (D06)
07...Scaled output frequency
(D07)
✔01 — Mon. PANEL
“B” Function Run-
time
Edit
Defaults DOP,DRW,DOP+
Func.
Code Name Description EU/
US Units Func.
Code Name
Technologies Inc.
Toll Free: voice: 1-877-539-2542 fax: 1-800-539-2542 www.mgitech.com