Hitachi L200 Note 1:, Note 2:, Write in Coils [0Fh]:, Note 1: Broadcasting is disabled, This function writes data in consecutive coils. An example follows:

B–15

L200 Inverter

Write in Coils [0Fh]:This function writes data in consecutive coils. An example follows:

•Change the state of intelligent input terminal [1] to [5] of an inverter having a slave address “5.”

•This example assumes the intelligent input terminals have terminal states listed below.

Item			Data
Intelligent input terminal	[1]	[2]	[3]	[4]	[5]
Coil number	7	8	9	10	11
Terminal status	ON	ON	ON	OFF	ON

Query:

No.	Field Name	Example
		(Hex)
1	Slave address *1	05
2	Function code	0F
3	Coil start number	00
	(high order)
4	Coil start number	07
	(low order)
5	Number of coils	00
	(high order)
6	Number of coils (low	06
	order)
7	Byte number *2	02
8	Change data	17
	(high order) *2
9	Change data	00
	(low order) *2
10	CRC-16 (high order)	DA
11	CRC-16 (low order)	EF

Response:

No.	Field Name	Example
		(Hex)
1	Slave address	05
2	Function code	0F
3	Data size (in bytes)	00
4	Coil data *3	07
5	Number of coils	00
	(high order)
6	Number of coils	06
	(low order)
7	CRC-16 (high order)	65
8	CRC-16 (low order)	8C

B Appendix

Note 1: Broadcasting is disabled.

Note 2: The change data is a set of high-order data and low-order data. So when the size (in bytes) of data to be changed is an odd number, add “1” to the data size (in bytes) to make it an even number.