Hitachi L200 Timing” on page 3–54, See “Output Logic and

B–38

ModBus Data Listing

		“C” Group Intelligent Terminal Functions
	Func.	Name	R/W	Description	Network Data
	Code				Reg.	Range	Res.
	C085	Thermistor input tuning	R/W	Range is 0.0 to 200.0%	00EEh	0 to 2000	0.1 %
	C086	[AM] terminal offset	R/W	Range is 0.0 to 10.0V	00C9h	0 to 100	0.1 V
		tuning
	C091	Debug mode enable	—	Displays debug parameters.	—	—	—
				Two option codes:
				00... Disable
				01... Enable
B
	C101	Up/Down memory	R/W	Controls speed setpoint for the	00CFh	0, 1	—
Appendix		mode		F001)
				inverter after power cycle. Two
		selection		option codes:
				00... Clear last frequency
				(return to default frequency
				01... Keep last frequency
				adjusted by UP/DWN
	C102	Reset selection	R/W	Determines response to Reset	00D0h	0, 1, 2	—
				input [RST].
				Three option codes:
				00... Cancel trip state at input
				signal ON transition, stops
				inverter if in Run Mode
				01... Cancel trip state at signal
				OFF transition, stops inverter if
				in Run Mode
				02... Cancel trip state at input
				signal ON transition, no effect
				if in Run Mode
	C141	Input A select for logic	R/W		00EFh	0, 1, 2, 3,	—
		output		See “Output Logic and		4, 5, 6, 7,
				Timing” on page 3–54		8, 9
	C142	Input B select for logic	R/W		00F0h
		output
	C143	Logic function select	R/W	Applies a logic function to	00F1h	0, 1, 2	—
				calculate [LOG] output state,
				three options:
				00... [LOG] = A AND B
				01... [LOG] = A OR B
				02... [LOG] = A XOR B
	C144	Terminal [11] ON delay	R/W	Range is 0.0 to 100.0 sec.	00F2h	0 to 1000	0.1 sec
	C145	Terminal [11] OFF	R/W	Range is 0.0 to 100.0 sec.	00F3h	0 to 1000	0.1 sec
		delay
	C146	Terminal [12] ON delay	R/W	Range is 0.0 to 100.0 sec.	00F4h	0 to 1000	0.1 sec
	C147	Terminal [12] OFF	R/W	Range is 0.0 to 100.0 sec.	00F5h	0 to 1000	0.1 sec
		delay
	C148	Output relay ON delay	R/W	Range is 0.0 to 100.0 sec.	00F6h	0 to 1000	0.1 sec