Hitachi L200 Note 1: Assume that the inverter current rating is 1000 (for D002)

B–23

L200 Inverter

Note 1: Assume that the inverter current rating is 1000 (for D002).

The following table lists holding registers for the “D” Group Monitor Functions.

	Holding Registers, “D” Group Monitor Functions
Func.	Name	R/W	Description	Network Data
Code				Reg.	Res.
		R	Trip monitor 1: factor code	0100h	—
		R	Frequency	0101h	0.1 Hz
		R	Current	0102h	0.1 %	Appendix
		R	Run time (low)	0105h	0.1 V
D081	Trip monitor 1	R	Voltage	0103h
		R	Run time (high)	0104h	1. h
						B
		R	ON time (high)	0106h	1. h
		R	ON time (low)	0107h
		R	Trip monitor 1: factor code	0108h	—
		R	Frequency	0109h	0.1 Hz
		R	Current	010Ah	0.1 %
D082	Trip monitor 2	R	Voltage	010Bh	0.1 V
		R	Run time (high)	010Ch	1. h
		R	Run time (low)	010Dh
		R	ON time (high)	010Eh	1. h
		R	ON time (low)	010Fh
		R	Trip monitor 1: factor code	0110h	—
		R	Frequency	0111h	0.1 Hz
		R	Current	0112h	0.1 %
D083	Trip monitor 3	R	Voltage	0113h	0.1 V
		R	Run time (high)	0114h	1. h
		R	Run time (low)	0115h
		R	ON time (high)	0116h	1. h
		R	ON time (low)	0117h
—	Write all memory	W	Infinite *1	0900h	—

Note 1: Stores new data made by transmission (for Write all memory). For more information, refer to the Store New Register Data (ENTER command).