Hitachi L200 R/W, Reg, Func, Name, Code, Description, Holding Registers for “A” Group Standard Functions

B–25

L200 Inverter

The following table lists the holding registers for the “A” Group Standard Functions.

	Holding Registers for “A” Group Standard Functions
Func.	Name	R/W	Description		Network Data
Code				Reg.		Range	Res.
A001	Frequency source	R/W	Five options; select codes:	002Dh		0 to 3, 10	—
	setting		00... Keypad potentiometer
			01... Control terminal
			02... Function F001 setting
			03... ModBus network input
			10... Calculate function output
								Appendix
A002	Run command source	R/W	Three options; select codes:	002Eh		1, 2, 3	—
	setting		03... ModBus network input
			01... Control terminal
			02... Run key on keypad, or
			digital operator
								B
A003	Base frequency setting	R/W	Settable from 30 Hz to the	002Fh		30 to	1 Hz
			maximum frequency			max. freq.
A203	Base frequency setting,	R/W	Settable from 30 Hz to the 2nd	0030h		30 to	1 Hz
	2nd motor		maximum frequency			max. freq.
						2
A004	Maximum frequency	R/W	Settable from the base	0031h		30 to 400	1 Hz
	setting		frequency up to 400 Hz
A204	Maximum frequency	R/W	Settable from the 2nd base	0032h		30 to 400	1 Hz
	setting, 2nd motor		frequency up to 400 Hz
A005	[AT] selection	R/W	Four options, select codes:	0033h		0, 1, 2, 3	—
			00... Select between [O] and
			[OI] at [AT]
			01... [O] + [OI] ([AT] input is
			ignored)
			02... Select between [O] and
			keypad potentiometer
			03... Select between [OI] and
			keypad potentiometer
A011	Pot./O–L input active	R/W	The output frequency corre-	0034h		0 to 4000	0.1 Hz
	range start frequency		sponding to the analog input
			range starting point,
			range is 0.0 to 400.0
A012	Pot./O–L input active	R/W	The output frequency corre-	0035h		0 to 4000	0.1 Hz
	range end frequency		sponding to the analog input
			range ending point,
			range is 0.0 to 400.0
A013	Pot./O–L input active	R/W	The starting point (offset) for	0036h		0 to 100	1 %
	range start voltage		the active analog input range,
			range is 0. to 100
A014	Pot./O–L input active	R/W	The ending point (offset) for	0037h		0 to 100	1 %
	range end voltage		the active analog input range,
			range is 0. to 100.