Hitachi L200 Functions.I, See “Output Terminal, Configuration” on page 3–, See “Input Terminal Config

B–36

ModBus Data Listing

The following table lists the holding registers for the “C” Group Intelligent Input

Functions.I

		“C” Group Intelligent Terminal Functions
	Func.	Name	R/W	Description	Network Data
	Code				Reg.	Range	Res.
	C001	Terminal [1] function	R/W		00A7h	0, 1, 2, 3,	—
						4, 5, 6, 7,
	C002	Terminal [2] function	R/W		00A8h
						8, 9, 11,
	C003	Terminal [3] function	R/W		00A9h	12, 13,
						15, 16,
	C004	Terminal [4] function	R/W	See “Input Terminal Config-	00AAh
B						18, 19,
Appendix	C005	Terminal [5] function	R/W	uration” on page 3–42	00ABh	20, 21,
						22, 23,
						24, 27,
						28, 29,
						31, 50,
						51, 255
	C011	Terminal [1] active state	R/W	Select logic convention, two	00ADh	0, 1	—
				option codes:
	C012	Terminal [2] active state	R/W		00AEh	0, 1	—
				00... normally open [NO]
	C013	Terminal [3] active state	R/W	01... normally closed [NC]	00AFh	0, 1	—
	C014	Terminal [4] active state	R/W		00B0h	0, 1	—
	C015	Terminal [5] active state	R/W		00B1h	0, 1	—
	C021	Terminal [11] function	R/W	See “Output Terminal	00B3h		—
						0, 1, 2, 3,
	C022	Terminal [12] function	R/W		00B4h
				Configuration” on page 3–		4, 5, 6, 7,
	C026	Alarm relay terminal	R/W	47	00B5h	8, 9
		function
	C028	[AM] signal selection	R/W	Two available functions:	00B7h	0, 1	—
				00... Actual motor speed
				01... Motor current
	C031	Terminal [11] active	R/W	Select logic convention, two	00B8h	0, 1	—
		state		option codes:
				00... normally open (NO)
				01... normally closed (NC)
	C032	Terminal [12] active	R/W	Select logic convention, two	00B9h	0, 1	—
		state		option codes:
				00... normally open (NO)
				01... normally closed (NC)
	C036	Alarm relay active state	R/W	Select logic convention, two	00BAh	0, 1	—
				option codes:
				00... normally open (NO)
				01... normally closed (NC)
	C041	Overload level setting	R/W	Sets the overload signal level	00BBh	0 to	0.01 %
				between 0% and 200% (from 0		20000
				to two times the rated current
				of the inverter)