SAFETY INFORMATION.

The information in this manual has been prepared to assist the operator to understand, maintain and operate the N50 mixer. Before installation or operating for the first time, this manual must be studied to obtain a clear understanding of the mixer and its capabilities.

To prevent accidents, read, understand and follow all the precautions and warnings contained in this manual before operating or carrying out any of the cleaning/maintenance operations. For warning information see the section below, the section on ‘commissioning and operation’, and ‘using attachments’. The procedures and precautions contained in this manual are understood to apply to the machinery only when it is used in the authorized manner. If the machinery is used other than in the authorized manner, the operator will be responsible for his/her own safety and for the safety of the other persons who may be involved.

•Ensure this manual is kept in an easily accessible place for future reference near the mixer.

•All operators must be trained in the safe operation of the mixer and attachments.

•Do not remove any covers or loosen any fittings while the mixer is operating.

•Ensure the electrical supply has been isolated before attempting to service or move the mixer.

•Rotating machinery and electricity are potentially hazardous and may cause injury if sufficient precautions are not taken prior to operating or servicing the machine.

•Always have your mixer and attachments regularly serviced at least twice a year, depending on the frequency of use.

•Do not hose or pressure clean this appliance. Follow the cleaning instructions detailed in this manual.

WARNING SYMBOLS.

To identify the safety messages in this manual, the following symbols have been used:

The “Warning” symbol is found primarily where the corresponding information is important for the safe use of the machinery.

The electrical hazard symbol is used when there are risks of an electrical nature. Prior to servicing the machinery, always disconnect the power cable from the mains supply.

– 6 –

Page 5 Page 7
Page 6
Image 6
Hobart N50 MIXER manual Safety Information
Page 5 Page 7

N50 MIXER specifications

The Hobart N50 mixer is a prominent choice for commercial kitchens that demand efficiency and reliability in their food preparation processes. Known for its durability and performance, the N50 mixer is a staple in bakeries, restaurants, and catering operations, designed to handle various mixing tasks with ease.

One of the primary features of the Hobart N50 mixer is its powerful motor, rated at 1/2 horsepower, which ensures consistent and thorough mixing of ingredients. This robust motor allows the mixer to handle dense doughs and large batches without compromising performance. The N50 is equipped with a gear-driven transmission that provides a range of mixing speeds, allowing operators to select the perfect speed for their specific tasks, from slow and gentle mixing to faster, more vigorous blending.

The N50's 5-quart stainless steel bowl is designed for maximum capacity and efficiency. This spacious bowl is ideal for a variety of recipes, from small quantities of frosting to larger batches of dough. The stainless steel construction not only provides durability but also makes it easy to clean, a significant consideration in any busy kitchen environment.

Another notable aspect of the Hobart N50 mixer is its user-friendly design. The mixer features a simple, ergonomic control panel that allows for easy operation. The bowl can be raised and lowered with a single lever, providing convenient access for adding ingredients or removing the finished product. Additionally, the mixer includes a clear and intuitive speed control knob, facilitating quick adjustments while mixing.

The N50 is equipped with various attachments that expand its versatility. The standard equipment includes a flat beater, wire whip, and dough hook, enabling the mixer to tackle a wide range of culinary tasks. Optional accessories are available, allowing operators to customize their mixer to suit their specific needs, whether they're whipping cream, kneading dough, or preparing batter.

Hobart is recognized for integrating advanced technologies into their equipment, and the N50 mixer is no exception. The mixer is designed with safety features, such as a safety overload switch that prevents damage from unnecessary strain, ensuring longevity and reliability.

In conclusion, the Hobart N50 mixer stands out with its powerful motor, durable construction, user-friendly features, and versatility for various culinary tasks. It’s an essential tool that combines superior performance with thoughtful technology, making it a trusted choice for foodservice professionals worldwide.
Top Page Image Contents