Hobart N50 MIXER manual Fault Finding, Recommended Spare Parts

FAULT FINDING.

Fault		Possible cause		Remedy
Machine fails to start.		Blown fuse.		Check and replace faulty
				fuse.
		Bowl support is not in the correct		Place bowl in up position.
		operating position.
		Bowl guard is not in the correct		Place guard in position.
		operating position.
		Speed selection lever not in correct		Set to required speed
		operating position.		position.
		Check gear level position. If not		Move gear lever to
		correctly engaged, mixer will not		desired speed.
		start.
		Check that electrical supply is		Plug in and switch on.
		switched on.
		Machine still fails to operate.		Call local service centre.
Motor starts but		Gear selection lever incorrectly		Move to the correct speed.
shaft fails to turn.		positioned.
		If planetary shaft still fails to turn.		Call local service centre.
RECOMMENDED SPARE PARTS.
Item	Description		Part number		Qty
1	Bowl		S-78575-2		1
2	‘E’ dough hook		D-478548		1
3	‘D’ wire whip		P-77764		1
4	‘B’ flat beater (aluminum)		P-9033		1
5	‘B’ flat beater (stainless steel)		R-62458		1
6	Guard, wire cage		478114		1
7	Agitator shaft spring		V-111227		1
8	Drip cup		P-21625-3		1
9	Thumb screw, attachment hub		A-16951-4		1
10	End cover		R-120433-2		1
11	Rubber foot		271650		4
12	Bowl retaining pin		B-240185		2
13	Bowl clamp, LH		C-291444-1		1
14	Bowl clamp, RH		C-291444-2		1
15	Spring washer, bowl clamp		B-291263		6
16	Lubricating grease, planetary and gearbox		SU-E-4-14		0.6kg

– 18 –